1、及时更换真空包装机上的排气过滤器，如果真空泵的温度明显升高，电动机电流达到或超过额定电流，泵的排气口有油烟产生，则应安插排气过滤器是否堵塞，如果堵塞的话应该及时更换新的，此外，还可以在真空机的泵加油孔处安装排气压力表，检查过滤器是否堵塞，当压力超过0.6bar时可更换排气过滤器。
1, and timely replacement of the exhaust filter vacuum packaging machine, if the temperature of the vacuum pump was significantly increased, the motor current reaches or exceeds the rated current, pump outlet is produce smoke, should decorate exhaust filter is blocked, if jam should be timely replacement of, in addition, also can in the machine, vacuum pump gas hole to install the exhaust pressure gauge, check the filter is blocked, when the pressure exceeds the 0.6bar replace the exhaust filter.
2、清洗真空包装机的吸气过滤网，吸气过滤网应该保持清洁，以免抽速下降，吸气口滤网是防止较大颗粒的杂质的过滤网。
2, cleaning vacuum packaging machine suction filter net, air filter should be kept clean, so as not to pump speed down, the suction inlet filter is to prevent large particles of impurities in the filter screen.
3、清洗真空包装机的吸气阀瓣，当真空包装机的吸气嘴有泄露时，将吸气嘴内的吸气阀瓣方清洗液里清洗一下，用空气压缩机吹净，保证装入吸气嘴内干净平整。
3, cleaning, vacuum packaging machine, suction valve, when leak suction nozzle of vacuum packaging machine, suction mouth of the suction valve valve cleaning fluid cleaning, air compressor for blowing the net, ensure into the suction mouth clean and neat.
我们将倾情为您解答。